What we integrate

Six systems.
One integrator.

We specify, install, and commission all six AVIT disciplines as a single integrated system — with one point of contact, one set of drawings, and one team accountable for the result.

01

Home Automation & Control

The backbone of a fully integrated property. We design, specify, and program centralised control platforms — primarily Lutron HomeWorks and Crestron — that unify lighting, climate, scenes, schedules, and third-party devices under a single coherent interface.

  • —Scene and schedule programming (morning, evening, away, cinema)
  • —Multi-zone climate and thermostat control
  • —Integration with AV, shading, and access systems
  • —Touchscreen, keypad, and mobile app interfaces
  • —Crestron and Lutron HomeWorks specification and programming

02

AV Systems

Audio and video systems designed to disappear into the architecture. We specify and install distributed audio, dedicated home cinema rooms, invisible in-wall and in-ceiling speaker arrays, multi-room video distribution, and acoustic treatment — tuned to the specific dimensions and finishes of each space.

  • —Dedicated home cinema rooms (Dolby Atmos, 4K laser projection)
  • —Distributed whole-home audio (in-ceiling, in-wall, landscape)
  • —Multi-room video distribution and matrix switching
  • —Acoustic design and panel treatment
  • —Marantz, Sonance, VOID Acoustics, James Loudspeakers, Anthem, Binary specification

03

Wi-Fi & Networking

Enterprise-grade infrastructure built for homes and commercial environments that run dozens to hundreds of connected devices simultaneously. Reliable wireless coverage, clean wired backbone, and proper network segmentation — designed and managed as a critical utility, not an afterthought.

  • —Managed Layer 2/3 switching and structured cabling
  • —High-density wireless access point design and placement
  • —Network segmentation (IoT, AV, management, guest VLANs)
  • —Fiber backbone for large-footprint properties
  • —Ubiquiti UniFi specification, installation, and management

04

Access Control

From video intercom at the gate to multi-door access management across a commercial floor — we integrate access control with the broader automation platform so doors, cameras, intercoms, and alerts work as a single coherent system rather than isolated products.

  • —IP video intercom (gate, front door, service entry)
  • —Multi-door and multi-apartment access management
  • —Proximity card, PIN, and mobile credential systems
  • —IP PBX integration and voice intercom
  • —Integration with automation and surveillance platforms

05

Surveillance

Full-property CCTV designed for the specific site — not a generic camera-count quote. We determine placement, specify appropriate hardware for each location, configure NVR storage, and integrate the system with access control and automation so events trigger the right responses.

  • —Site-specific camera placement and specification
  • —PTZ, fixed, and covert camera configurations
  • —NVR/DVR storage design and remote viewing setup
  • —Perimeter detection and motion-triggered alerts
  • —Integration with access control and automation events

06

Motorized Shading

Lutron Sivoia QS motorized drapery tracks and roller blinds, specified and programmed to work with the lighting system. Daylight harvesting, scene-based shading, and scheduled movement — all controlled from the same keypad or app as everything else.

  • —Lutron Sivoia QS motorized roller blinds and drapery tracks
  • —Scene-based programming tied to lighting and automation
  • —Daylight harvesting and solar-angle-aware scheduling
  • —Battery, hardwired, and solar-powered options by location
  • —Full integration with HomeWorks and Crestron platforms

Ready to discuss a project?

We work with private clients, architects, developers, and contractors. Tell us about your project and we'll tell you whether we're the right fit.